DIN Bellows Seal Carbon Steel Globe Valve (Stop Valve)

• Customization: Available
• Media: Water
• Temperature: Ordinary Temperature
• Model NO.: J41T-16
• Actuator: Manual
• Material: Carbon Steel
• Structure: Through Way Globe Valve
• Sealing Form: Brass
• Stem Thread Position: Outside Screw Stem Globe Valve
• Application: Lining Fluorine Valve, Needle Type Globe Valve, Cryogenic Globe Valve, Plunger Type Globe Valve, Heat Preservation Globe Valve, Forged Steel Globe Valve, Oxygen Globe Valve, Bellows Globe Valve
• Standard: DIN, GB, ANSI, BSW, JIS
• Transport Package: Wooden Case
• Specification: DN15~DN300
• Trademark: Zj
• Origin: Hebei, China

Product Description

Din standard bellows seal ptfe lined dn150 pn40 cast iron globe valve for steam
One of the most frequent and serious problems valve face is gland leakage,results in wasted and increased plant downtime . Apart from the high cost of energy losses, Gland leakages can also cause serious environmental , ecological and health hazards to plant workers and personnel , Leakage of sensitive material can also constitude to a fire hazard , explosion, or damage to equipment by corrosive material . Air entering the pipeline could produce inflammable explosive or poisonous mixtures. Gland packed valves ofen demand continual maintenance in accessibility creating particular difficulties . The bellows complies to conditions at high temperatures and are capable of withstanding over 10,000 cycles without failure.

Technical specification
Design standard: DIN 3356
Face to face dimension: DIN 3202
Flanged ends: DIN 2543-2545
Test & inspection: DIN 3230
 

Main part materials

NO.	Part name	Material
1	Body	GS-C25,GGG-40G,1.4401
2	Seat	1.4301,Stellite
3	Disc	1.4021,1.4401+Stellite
4	Stem	1.4021,1.4401
5	Bellows	1.4301,1.4401
6	Gasket	Flexible Graphite+stainless steel
7	Bonnet	GS-C25,GGG-40G,1.4401
8	Bolt	A193-B7,A193-B8
9	Nut	A194-2H,A194-8
10	Packing	Flexible graphite
11	Packing Gasket	1.4021,1.4401
12	Gland	1C45,1.4401
13	Locator	1C25
14	Pin	1C35
15	Stem nut	Alloy steel,Copper alloy
16	Handwheel	Carbon steel
17	Cap	1C35

Performance specification

Nominal Pressure		PN
Test Pressure	Strength test	1.5PN	MPa
	Sealing test	1.1PN
	Gas seal test	0.6
	--	--
Suitable temp		-196ºC~600ºC